Fantastic, easy to use vape pen for wax. This is not the most high tech vape but it gets the job done well and the small, pen shape size makes the vape convenient for handling. Like all wax vapes you'll eventually need a new heating chamber or want a new mouthpiece and the spare parts for this vape are low priced just like this vape kit.
Jr kit includes
see Tips & Manuals tab plus the Video tab for more information on this product
How to use the AGO Jr Vaporizer
1. Use the provided usb charger to charge your AGO Jr battery.
2. Screw the heating chamber onto the top of the battery and test the chamber.
3. The AGO Jr chamber can be used with either dry herbs or wax, BUT, do not use the two in the same chamber; get separate chambers for each.
4. When dealing with wax, gently place a small ball size amount of wax into the chamber. Carefully push it towards the coil. DO NOT poke the coil directly and be careful because the coil is fragile.
5. When dealing with dry herbs, grind the herbs up well and place them into the chamber. DO NOT overpack and force too much downward pressure on the coil or you can damage it.
6. Once packed, screw the mouthpiece back on to the top of the heating chamber.
7. Press the power button to heat the coil. As the coil heats the wax or herbs inside, you can begin to take some puffs. If you wait long enough you may see some vapor start to pour out of the vents on the sides of the chamber. In time you will become one with your vape.
8. After about 10 seconds of holding the power button, the vape will stop heating the chamber. This is a safety feature of the device. Just release the power button and then press it again to begin heating the chamber again.
9. Specifically with wax, especially right after you heat the chamber, keep your vape pen standing upright. When wax is heated, it becomes more fluid like and if you lay the vape pen down horizontally, the warm wax will flow in that direction and can cause a sticky mess.
10. Like any other dry herb vape, you should empty the chamber every time when you finish vaping. This will maximize the condition of your chamber.
How to Charge the AGO Jr Vape Battery
1. Plug the provided usb charger into a power source. If it is properly plugged in the LED light on the charger will turn green.
2. Screw the Jr battery into the usb charger. The light on the bottom of the Jr should blink and then stay solid. And the light on the usb charger should go from green to red while the battery is charging. Once the battery is fully charged, the LED on the charger will turn green.
3. NEVER leave your vape charging over night. Make sure to store it in a cool and dry place for maximum performance.
AGO & Atmos Jr replacement parts
Atmos & AGO Jr heating chamber replacement