How to use the Titan vaporizer1.
If needed, charge the Titan with the supplied usb charger.
Remove the mouthpiece from the top of the vaporizer and load the chamber with your herbs of choice.
It is best to use a grinder to break up your herbs to create more surface area for the purpose of enjoying a nice even vape throughout your packing.
Press the power button 5 times quickly in a row to turn the unit on.
Once the unit powers on, the heating chamber
will start to heat until it reaches the chosen heat setting.
To switch between the 3 different temperature settings, press and hold the power button for 3-4 seconds and then release.
The current heat setting will be indicated by the color of the LED light below the power button.
Red 360°F; Green 380°F; Blue 420°F
As the chamber heats up, the herbs will begin to release vapor. The density of the herbs and how well they have been ground up, or how tightly packed they are, and other variables will impact exactly when the herbs begin to vaporize and at what temperature.
The higher the temperature, the thicker the vapor cloud. The lower the temperature, the less visible the vapor will be.
You don't need to wait for any of the heat settings to be reached in full to start taking hits from the Titan. In fact, if you wait for it to reach 420°F, you will likely see vapor start to leak out of the air intake holes.
The vaporizer has an automatic shut-off feature that will shut the unit down after 5 straight minutes of heating. This is a safety feature for both the user and for helping to maintain the integrity of the device.
If your device automatically shuts off while in use don't worry because the chamber maintains the heat well and you can quickly turn the unit right back on with 5 quick, consecutive clicks of the power button.
When you have exhausted the herbs and it is time to empty the heating chamber, gently scrape out the herbs. Use a cleaning brush if needed to remove any sort of particles stuck to the sides of the chamber walls.
Remove any debris that may be on the screen and mouthpiece.
Once you have properly emptied your chamber you can either pack it again or put the vape away. Make sure to store your vaporizer in a cool, dry place!
How to clean the Titan vaporizer1.
The outside of the vaporizer can be wiped down with a damp cloth or paper towel. Do Not use anything that is dripping wet and keep the device away from liquids.
To clean the mouthpiece, you can use rubbing alcohol or soap and water. Thoroughly rinse with warm water after cleaning with anything.
To thoroughly clean the screen and metal screw piece, you can either soak them in boiling water or rubbing alcohol.
If you always empty the chamber when you are finished vaping and use the cleaning brush to clear any remaining debris, you should not have to clean the heating chamber. If you really want, you can take a q-tip soaked in rubbing alcohol and clean the sides. NEVER use a q-tip that is wet enough to drip even 1 drop into the chamber! After cleaning, heat the chamber for a couple minutes while it is empty.
How to charge the Titan vaporizer1.
Plug the provided usb charger into a properly working power source.
Plug the micro usb end into the charging port on the bottom of the Titan vaporizer.
While the vaporizer is charging the power button will be lit up red.
When the unit is finished charging, the power button will turn green.
The vaporizer should take 3-4 hours to charge.
Never leave your vaporizer charging overnight and always use the provided usb charging cable.
Related Blog Articles1. 3 pack Vape Mouthpiece for G Pro and Titan