FREE USA SHIPPING - Priority, Signature Priority, plus Worldwide Shipping Options Available
Titan 1 Vaporizer
Micro usb charging cable
2-pack extended mouthpiece sleeves
3-pack mouthpiece covers
4-pack replacement screens
Titan Vape Details
This is a Dry Herb Vaporizer designed for use with dry herbs
Temperature Control Settings - 3 settings, 360°F, 380°F, 420°F
Battery Capacity - 2200 mah
Vape Height - 5.5 inches Tall
Vape Diameter - 0.9 inches Wide
How to use the Titan vaporizer
1. If needed, charge the Titan vaporizer with the usb charger included in the vape kit. 2. If the vape is charged, the next thing to do is, load the dry herbs. Remove the mouthpiece from the top of the vaporizer and load the heating chamber with your herbs of choice. It is best to use an herb grinder to break up buds and to create more surface area for the purpose of enjoying a nice even vape throughout the chamber. 3. Press the power button 5 times quickly in a row to turn the Titan on. Once the vaporizer powers on, the heating chamber will start to heat until it reaches the chosen heat setting. You can choose between 3 settings. 4. The LED light behind the power button will be red until the vape reaches the heat setting chosen. When the temperature setting is reached, the light behind the power button turns green. To switch between the 3 different temperature settings, press and hold the power button for 3-4 seconds and then release. The current heat setting will be indicated by the color of the LED light below the power button. 5. Heat Settings are as follows, Red 360°F, Green 380°F, Blue 420°F 6. As the chamber heats up, the herbs will begin to release vapor. The density of the herbs and how well they have been ground up, or how tightly packed they are, and other variables will impact exactly when and how quickly the herbs begin to vaporize. 7. The higher the temperature, the thicker the vapor cloud. The lower the temperature, the less visible the vapor will be. 8. You don't need to wait for any of the heat settings to be reached in full to start taking puffs from the Titan. In fact, if you wait for it to reach 420°F, you will likely see vapor start to leak out of the air intake holes. 9. The vaporizer has an automatic shut-off feature that will shut the unit down after 5 straight minutes of heating. This is a safety feature for both the user and for helping to maintain the integrity of the device. If your device automatically shuts off while in use don't worry because the chamber maintains the heat well and you can quickly turn the unit right back on with 5 quick, consecutive clicks of the power button. 10. When you have exhausted the herbs and it is time to empty the heating chamber, gently scrape out the herbs. Use a cleaning brush can be used if needed to remove any sort of particles stuck to the sides of the chamber walls. 11. Remove any debris that may be on the screen and mouthpiece. 12. Once you have properly emptied your chamber you can either pack it again or put the vape away. Make sure to store your vaporizer in a cool, dry place!
How to clean the Titan vaporizer
1. The outside of the vaporizer can be wiped down with a damp cloth or paper towel. Do Not use anything that is dripping wet and keep the device away from liquids. 2. To clean the mouthpiece, metal screw piece and filter screens, you can soak the parts in rubbing alcohol or soap and water. Thoroughly rinse with warm water after cleaning with anything. 3. If you always empty the chamber when you are finished vaping and use the cleaning brush to clear any remaining debris, you should not have to clean the heating chamber. If you really want, you can take a q-tip soaked in rubbing alcohol and wipe-down the sides. NEVER use a q-tip that is wet enough to drip even 1 drop into the chamber! After cleaning, heat the chamber for a couple minutes while it is empty to burn off any sort of fume.
How to charge the Titan vaporizer
1. Plug the provided usb charger into a properly working power source. 2. Plug the micro usb charger into the charging port on the bottom of the Titan dry herb vaporizer. 3. While the vaporizer is charging, the power button will be lit up red. 4. When the unit is fully charged, the power button will turn green. 5. The vaporizer should take 3-4 hours to charge max. 6. Never leave your vaporizer charging overnight and always use the provided usb charging cable.