How to use and fill the Q Tank
The Q Tank is very straight forward and easy to use. The tank can be filled once it is attached to the battery or before doing so. Just make sure not to spill any e juice or oil. Do Not dry heat the atomizer which means do not heat it without any liquid inside.
Once properly screwed to your battery or properly set up on the table, remove the top of the tank by unscrewing the mouthpiece to reveal a circular hole in the center and the two other larger, stretched holes on the sides. Fill the e juice or other oil through the two side holes. Do Not overfill the tank. And Do Not fill the middle hole. The middle hole is where the vapor will travel out of up through the mouthpiece.
When filled with your liquid of choice, close the atomizer by returning the mouthpiece to its proper spot on top and screw it in tightly. To start vaping, attach the atomizer
to your battery if you have not already done so. If you have a variable wattage battery or box mod, start at the lowest wattage output setting and raise it higher if needed. It is always better to start lower rather than higher to avoid burning out any atomizers.
Box Mod Vape Batteries that work with the Q Tank
1. SteamCloud Box Mod Vape
2. Kamry Vape Mod